Model TLS-_VA | 1000 | 2000 | 3000 | 4000 | 5000 | 7000 | 8000 | 10000 |
Rating Power(KW) | 1 | 2 | 3 | 4 | 5 | 7 | 8 | 10 |
Input Voltage(V/DC) | 24/48 | 24/48 | 48/96 | 48/96 | 48/96 | 192 | 192 | 192 |
To discharge current(A) | 42/20 | 83/42 | 63/32 | 73/41 | 52/26 | 36 | 42 | 52 |
Output Voltage(V) | 100/110/120/220/230/240(±5%) | |||||||
Frequency(Hz) | 50/60Hz±0.5% | |||||||
Charge current(A) | 5A | |||||||
Peak overload ability | 150%,5s | |||||||
THD | ≤3% | |||||||
Waveform | Pure sine wave | |||||||
Noise | ≤55dB | |||||||
Inverter efficiency | ≥95% | |||||||
Protection | Overload,over voltage,over temperature,short circuit protection,normal voltage over-voltage auto-recovery | |||||||
Environment temperature | -10ºC - +60ºC | |||||||
Humidity | ≤90%RH | |||||||
Altitude | ≤4000m | |||||||
Dimension(H*W*L)(mm) | 410*180*300 | 480*350*630 | 475*400*810 | |||||
Weight(KG) | 30 | 40.5 | 46 | 51 | 57 | 90 | 95 | 101 |
Item | 15KW | 20KW | 30KW |
Half Cell Solar Panel | 40 pieces | 56 pieces | 80 pieces |
PV Combiner Box | 8inputs 3outputs | 7inputs 2outputs | 8inputs 3outputs |
Charge Controller MPPT/PWM | 120V 150A | 192V 100A | 240V 150A |
Off Grid Inverter | 15kw | 20kw | 30kw |
Solar Battery | GEL/Lithium LifePO4 | GEL/Lithium LifePO4 | GEL/Lithium LifePO4 |
PV Cable | 6/16mm2 | 6/16mm2 | 6/16mm2 |
Mounting Bracket | Tile Roof/Ground | Tile Roof/Ground | Tile Roof/Ground |
MC4 Connector | 40pcs | 56pcs | 80pcs |
Installation Tool Box | 1set | 1set | 1set |
Installation Manual | Yes | Yes | Yes |
current will be impacted, while the other array will still be functionally producing power. Under this circumstance, when a module
is shaded, the affected working areas of Blade will be 50% less.
By cutting solar cell into halves, the internal power loss will be lower and hot spot effect will also be reduced.
Feed power to the grid. When the grid is abnormal, the inverter will swing to perform anti-islanding detection. Switch from the need to switch to off-grid power generation mode. Although the grid is abnormal, the inverter continues to invert photovoltaic power into high-quality AC power to the load. powered by. In this way, it is possible to prevent the shortcomings that normal power generation cannot be performed even though the photovoltaic is normal due to the abnormality of the grid in the stand-alone grid-connected mode.
Lighter Weight : About 40% of the weight of a comparable lead acid battery . A " drop in" replacement for lead acid batteries
Higher Power : Delivers twice power of lead acid battery ,even high discharge rate, while maintaining high energy capacity
Wider Temperature Range : -20ºC~60ºC
Superior Safety: Lithium Iron Phosphate chemistry eleminates the risk of explosion or combustion due to high impact overcharging
or short circuit situation
Flat roof solar mounting system
Ballast type solar mounting system
Ground solar mounting system
Carport solar mounting system
Packed in firm wooden case
12 working days after receiving balance.
Our Service:
b.Asymmetric dual MPPT which are compatible to all kinds of solar roofs
c.Max. efficiency of 98.0%, European efficiency of 97.6%
d.Super wide input voltage range(150V-1000V), supporting all varieties of solar panels and string desings
e.With reduced derating
2.Convenient Installation
a.Transformerless, smaller and lighter
b.AC output quick connector design, for faster installation
c.Speciaized mountingl design, easy to install
3.Smart and Easy to Use
a.One-button safety setting, easy configuration of all parameters
b.Built-in independent RTC chip, supporting data storage of 25 years
c.Integrated LCD graphical display, showing daily/monthly/yearly generating capacity
d.Integrated RS232 / Wi-Fi interfaces, for improved communication
e.Free monitoring anytime anywhere
f.Local and remote intelligent maintenance by PC, IOS and Android devices
g.Responds to power grid dispatching, energy management of micro-grids
h.Integrated with the function of reactive adjusting
4.Safe and Reliable
a.IP65 protection for indoor and outdoor installation
b.Aluminum case design to enhance heat dissipation and prevent rust corrosion, prolong life time
c.Built-in high voltage DC switch for safer maintenance and application
d.Built-in convective fans to lower the temperature of core components, prolong life time
e.Natural convection for longer life
FAQ:
Q 1. what's the payment term?
A. We accept T/T, L/C,WEST UNION, PAYPAL, CASH
Q 2. What's the delivery time ?
A. usually it will take about three weeks for production
Q 3. What is the standard of package?
A. Export standard package or special package according to customer requirement
.
Q 4. what kind of product quality your factory offer?
A. We offer most competitive prices with best quality
Q 5. Do you accept OEM business?
A.We accept OEM with your autherization.
Q 6.What is your production capacity?
A. We can finish four 40 HQ mini circuit breaker each month, four 20 HQ contactor, two 20 feet container for the frequency
inverter. Each product has different production capacity, we can talk details by email.
Q 7.Which market do you already sell?
A.We already ship to Europ, Middle East, South America, Asia, Afria etc.
Q8. what kind of certificate you have ?
A.We have ISO9000, CB, CE, INMETRO, SONCAP, SASO
