off Grid Inverter 100kw Built in AC to DC Battery Charger 40A

off grid inverter 100kw built in AC to DC battery charger 40ABangzhao pure sine wave series inverter is one of the most advanced DC to AC conversion products in the world, it has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is simple, stable, no noise and no pollut

Featured Products

off grid inverter 100kw built in AC to DC battery charger 40A

Bangzhao pure sine wave series inverter is one of the most advanced DC to AC conversion products in the world, it has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is simple, stable, no noise and no pollution. It is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine etc. The inverter can also supply AC voltage to all kinds of power tools, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other power supply.

The inverter output waveform is pure sine wave; this kind of AC power is suitable for most industrial electronics and home appliances, the power supply features much better than other modified sine wave and square wave.

off Grid Inverter 100kw Built in AC to DC Battery Charger 40A

Technical Features for  inverter:

1, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of the load.

2, The output frequency can be set, this function is very convenient for customer.

3, The output voltage can be set between +20 % to -40 % of rated voltage. It's a great convenience to users.

4, The DC input voltage range can also be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be set via the LCD panel. Convenient for increasing or reducing the quantity of batteries, photovoltaic modules also can be used flexibly.

5, Pure sine wave output. with good transient response less than 40MS, little harmonic distortion, higher conversion efficiency and stable output voltage.

6, Powerful data display and fault instruction function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.

7, Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more.

8, Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 100-400V or 400-850V.

9, Product have passed the European CE (EMC and LVD) certificated and accredited by Australia CEC energy network.

Model

BZP-100KW

Isolation mode

Low Frequency Transformer

Battery Input

Rated voltage (Vdc)

600V

Rated current(A)

167A

Solar Input

Voltage range(Vdc)

480-850VDC

AC Input

Rated voltage(Vac)

380VAC

AC Output

Rated output power

100KW

Output waveform

Pure Sine Wave

Rated Voltage

380VAC±3%

Phases

3 phase 4 wire

Rated current(A)

152A (phase current)

Frequency

50Hz or 60Hz

Rated output voltage range (V)

380/400/415/440VAC optional

Power Factor(PF)

1

Overload Ability

150%, 5 seconds

Efficiency

>93%

Waveform distortion rate (THD)

<3%  line="" load="">

Dynamic Response (0 to 100% load)

5%,≤50ms

Display

LCD

Running mode

Working continuously

Electrical insulation properties

2000Vac, 1 Minute

Protection Function

Protection

Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.

Cooling method

Fan-cooled

Short-circuit protection

No automatic recovery, need to restart the machine

Working environment

Noise ( 1 meter)

≤50dB

Degree of protection

IP20(indoor)

Working Altitude(m)

≤2000

Working temperature

-25~+55ºC

relative humidity

0~90%,non-condensing

Mechanical dimension

Depth* Width * Height

900x1100x1600mm

Weight (Kg)

600Kg

Technical Features for  AC-DC charger:

Output overvoltage protection

To prevent the disastrous accident caused by output overvoltage to electric consumers, there is overvoltage protection circuit in the module. When output overvoltage occurs, the module locks up automatically, the relative module fault indication light is on, the faulty module quits work automatically and doesn't affect the normal operation of the entire system.

Output current limiting protect

The output current cannot increase infinitely. The maximum value of the output current of each module is limited to the rated output current 105%, in this range, the output current value of the module is continuously adjustable. If the load output of the module, the module will play down the output voltage

Output short-circuit protection

When output short circuit, the module draws the output voltage to 0 immediately, limit the short circuit current below 15%limit current point to protect the module. The module will not be damaged under short circuit state for a long time, and can go back to work automatically after debugging.

Module parallel protection

There is parallel protection circuit in each module to ensure that when the fault module quits the system, the normal work of other modules and the system won't be effect.

Over-temperature protection

Over-temperature protection is mainly for protecting large power converters, under normal operating circumstance, the module design leaves enough margin, under special circumstance, when the module detects that the temperature of the radiator is over 90ºC, it will shut down automatically to protect itself. When the temperature of radiator get down,  the module will restart work automatically.

Output over-current protection

Because of the limit of the module output power, the output current cannot increase infinitely. In the range, the output current value of the module is continuously adjustable. If overloaded, the module can reduce output voltage automatically to make it not surplus the rated output limit point in order to protect the power components. The over current protection can be resumed automatically.

Model  BZA-400X03ZZ400X05ZZ400X07ZZ400X10ZZ400X15ZZ600X03ZZ
Cooling methodNatural cooling
Temp. rise≤35ºC
AC input voltage380V±15%
DC output range300~450V350~400V260~400V450~600V
DC output current3A5A7A10A15A3A
Power factor≥0.93
Efficiency≥95%
Voltage stabilization accuracy≤±0.5%
Current stabilization accuracy≤±1%
Ripple≤±0.5%
Noise≤50dB
Current share imbalance±5%
CommunicationRS485
off Grid Inverter 100kw Built in AC to DC Battery Charger 40A
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours