Switching Power Supply 8kw~12kw Pure Sine Wave DC to AC Solar Power Inverter

8KW~12KW pure sine wave dc to ac solar power inverter*Large LCD display show voltage,frequency,battery capacity,etc.*Built-in AC battery charger which charging current can be adjusted*Pure sine wave*3times of rating power MODEL(PW Series)HV ModelPW8-12KW HV(230Vac)Line Mode Specifications:Input VoltageInput Voltage Waveform

Featured Products

8KW~12KW pure sine wave dc to ac solar power inverter

*Large LCD display show voltage,frequency,battery capacity,etc.
*Built-in AC battery charger which charging current can be adjusted
*Pure sine wave
*3times of rating power
Switching Power Supply 8kw~12kw Pure Sine Wave DC to AC Solar Power Inverter
Switching Power Supply 8kw~12kw Pure Sine Wave DC to AC Solar Power Inverter
Switching Power Supply 8kw~12kw Pure Sine Wave DC to AC Solar Power Inverter
 
MODEL
(PW Series)
HV Model
PW8-12KW HV(230Vac)

Line Mode Specifications:

Input Voltage
Input Voltage WaveformSinusoidal (utility or generator)
Nominal Input Voltage230Vac
Low Line Disconnect184Vac±4%
Low Line Re-connect194Vac ±4%
High Line Disconnect263Vac±4%
High Line Re-connect253Vac±4%
Max AC Input Voltage270Vrms
Input FrequencyNominal Input Frequency50Hz/ 60Hz (Auto detection)
Low Line Frequency Re-connect51+0.3Hz for 60Hz;
41+0.3Hz for 50Hz;
Low Line Frequency Disconnect50+0.3Hz for 60Hz;
40+0.3Hz for 50Hz;
High Line Frequency Re-connect64+0.3Hz for 60Hz;
54+0.3Hz for 50Hz;
High Line Frequency Disconnect65+0.3Hz for 60Hz;
55+0.3Hz for 50Hz;
main functions
 
Output Voltage WaveformAs same as Input Waveform
Over-Load Protection (SMPS load)Fuse
Output Short Circuit ProtectionFuse
Transfer Switch Rating63A/80A/100A
Max Bypass Overload Current100A

Battery Invert Mode Specifications:

output
Output Voltage WaveformSine wave
Rated Output Power (KW)8kw/10kw/12kw
Power Factor0.9~1.0
Nominal Output Voltage (V)230Vac ±10% rms
Nominal Output Frequency (Hz)60Hz ± 0.3Hz
50Hz ± 0.3Hz
DC VoltageNominal DC Input Voltage48V/72V
DC Voltage range40-62Vdc for 48VDC/ 70-93Vdc for 72VDC
Low Battery Alarm42.0Vdc ± 1.2Vdc for 48V battery
63.0Vdc ± 1.8Vdc for 72V battery
Low DC input Shut-down40.0Vdc ± 1.2Vdc for 48V battery
60.0vdc± 1.8Vdc for 72V battery
High DC input Alarm & Fault64Vdc ± 1.2Vdc for 48V battery
96Vdc ± 1.8Vdc for 72V battery
High DC input Recovery62.0Vdc ± 1.2Vdc for 48V battery
93.0Vdc ± 1.8Vdc for 72V battery
ChargerNominal Charge Current35A/50A(5 stages adjustable charging current)
Charge Current Regulation± 5Adc
Over Charge ProtectionBat. V ≥62Vdc / 93Vdc, beeps 0.5s every 1s & fault after 60s
AlgorithmThree stage:  Boost CC (constant current stage) → Boost CV (constant voltage stage) → Float (constant voltage stage)
EfficiencyEfficiency (Battery Mode)≥85%
Efficiency (Line Mode)>98%
Transfer TimeAc to Dc20ms (Max)
Dc to Ac15ms (Max)
System parameterOver-Load Protection110% <load<150%, beeps 0.5s every 1s, and Fault after 60s off the output, Load>150%, beeps 0.5s every 1s, and Fault after 20s.
Output Short Circuit ProtectionCurrent limit (Fault after 10s)
Surge rating (10s)1:3 (VA)
Power saverLoad <=25W (Enabled on "P/S auto" setting of Remote control)
ProtectionsLow battery, over charging, over load , over temp.
IndicatorsLED+LCD Display
General SpecificationsOperating Temperature Range0°C to 40°C
Storage temperature-15ºC ~60ºC
Operation humidity5% to 95%(non-condensing)
Audible Noise60dB max
CoolingForced air, variable speed fan
Dimension(L*W*H)538*255*630mm
Net weight(Kg)8KW10KW12KW
60kg65.5kg71kg

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours